Showing posts with label 6. Show all posts
Showing posts with label 6. Show all posts

Wednesday, November 12, 2014

6 V to 12 V Power Supply Inverter

This inverter circuit can provide up to 800mA of 12V power from a 6V supply. For example, you could run 12V car accessories in a 6V (British?) car. The circuit is simple, about 75% efficient and quite useful. By changing just a few components, you can also modify it for different voltages.


6 V to 12 V Power Supply Inverter Circuit Diagram

Part List:


R1, R4 2.2K 1/4W Resistor
R2, R3 4.7K 1/4W Resistor
R5 1K 1/4W Resistor
R6 1.5K 1/4W Resistor
R7 33K 1/4W Resistor
R8 10K 1/4W Resistor
C1,C2 0.1uF Ceramic Disc Capacitor
C3 470uF 25V Electrolytic Capcitor
D1 1N914 Diode
D2 1N4004 Diode
D3 12V 400mW Zener Diode
Q1, Q2, Q4 BC547 NPN Transistor
Q3 BD679 NPN Transistor
L1 See Notes
MISC Heatsink For Q3, Binding Posts (For Input/Output), Wire, Board
Read More..

Wednesday, October 8, 2014

TA8256BH bassed 6 watts 3 channel audio amplifier circuits

 ta8256bh bassed 6 watts 3 channel audio amplifier circuits

Using the TA8256BH audio amplifier IC can be designed a very simple 3 channel audio power amplifier for audio applications that require a small power .
This IC provides an output power of 6 watts per channel (at VCC = 20 V, f = 1 kHz, THD = 10%, RL = 8 Ω).

TA8256BH audio amplifier project is suitable for power amplifier of TV and home Stereo.
Some important build in functions of these audio circuit project , based on the TA8256BH are : audio muting circuit , thermal shut down protection circuit, over voltage protection circuit .
TA8256BH power amplifier can operate over a wide range input voltage from 10 to 30 volts .

Read More..

Thursday, August 14, 2014

6 12 Volt Adjustable Power Supply Circuit

adsjust power supply
Power Supply in this article use a regulator that is composed of 2 pieces of NPN transistor. A transistor acts as a power regulator and a transistor again serves as a controller output voltage.



Power Supply has an adjustable output with a range of 6-12 VDC. The part that serves as a power regulator is Q1 TIP31. Then the controller output voltage is a voltage divider composed of R3, R4, VR1 and R2 provide bias to the base of Q2 to Q1 mengentrol power regulator. In a series of power supply is mounted 5.1 V zener diode which serves to make the minimum limit the output voltage with Q2.
6 - 12 Volt | Adjustable Power Supply Circuit
Adjustable Power Supply with transistor circuit

Power Supply With transistor circuit is quite simple and can be made with the PCB holes, so for those who want to try to directly mempraktikannya. May the power supply circuit can be useful for readers, especially for friends who need a power supply circuit with the regulator transistor.
Read More..