Showing posts with label tube. Show all posts
Showing posts with label tube. Show all posts

Wednesday, November 19, 2014

Power Supply with tube

Power supply with Z2C tubes are designed specifically to provide power supply voltage to the EL-34 tube amplifier push-pull in the previous article. Power supply with Z2C tube to tube power amplifier is made with a tube rectifier Z2C. Just as the power supply for power amplifier tube earlier, power supply also uses a filter 3 levels with kapsitor electrolyte. Circuit power supply with tube rectifier Z2C can give +210 VDC output voltage. A complete range of power supply for power amplifier tube can be seen in thethe following figure .


Power Supply with tube


Z2C on the rectifier tube in power supply with tube above require a supply voltage for the filaments taken from the other side of the transformer secondary. Power supply with Z2C tube is a power supply that dapt used as a substitute power supply for power amplifier tubes .
Read More..

Wednesday, September 24, 2014

Simple Neon Tube Flasher Circuit

Flashing neon globes have use in many applications, however their relatively high working voltage precludes their general use where a mains supply is not available.
This simple neon tube flasher circuit enables neon tubes or bulbs to be operated from a low voltage dc supply. The voltage required to ignite the neon tube is obtained by using an ordinary filament transformer (240-6.3Vl in reverse. Battery drain is quite low  being in the region of 1 to 2 milliamps for a nine volt battery. O1 is a unijunction transistor and operates as a relaxation oscillator. its frequency of operation is determined by R2-C1.  The pulses from Q1 are directed to O2 which in tum drives O3 into saturation. The sharp rise in current through the 6.3V winding of the transformer as 03 goes into saturation induces a high voltage in the secondary winding causing the neon to flash.  The diode D1 protects the transistor from high voltage spikes generated when switching currents in the transformer. 


Read More..

Saturday, August 9, 2014

EL34 Stereo Tube Amplifier 2x90 Watts

The following are step by step how to create a stereo tube amplifier using EL34 power tube. This stereo tube amplifier schema is capable of producing an audio output of 90 watts for each channel.

EL34 Stereo Tube Amplifier 2x90 Watts


Download EL34 Stereo Tube Amplifier 2x90 Watts step by step guide.
Download Link
Read More..